Might a brand new
Hunt Confirmed Carbon Enduro H_Core mountain bike wheels
Hunt got down to construct the hardest set of carbon enduro wheels attainable with their new Confirmed Carbon Enduro H_Core wheels. However they nonetheless wished them to be each comparatively light-weight and inexpensive. So, based mostly on the concept rear wheels are inclined to take extra abuse than the entrance, Hunt settled on front- & rear-specific carbon rim layups, beads, and wheel builds.
They set their purpose to construct the strongest rear wheel for aggressive enduro bikes (150-190mm of journey), even on the expense of some additional grams, realizing they might save a little bit of weight on the entrance whereas nonetheless delivering loads of power. The consequence:
“Class-leading affect resistance: 220J rear wheel/170J entrance wheel affect ranking with H_Core carbon reinforcement and anti-splinter layup expertise.”
How did they make it so robust?
Hunt began off with their H_Core carbon rim insert reinforcement idea. They describe it as molding a pre-hardened “carbon-dense” ring into the center of their pre-preg carbon fibers throughout layup to considerably strengthen the “high-stress junction between the rim mattress and sidewall”, rising affect resistance with out including weight.
This apparently imparts a lot greater power to the purpose carbon rims sometimes fail, by guaranteeing extra constant carbon compaction and easy fibers bends within the mildew.
Then, identical to they did with the Confirmed Path H-Core carbon rims launched at the beginning of the yr, Hunt molds this tech into front- & rear-specific rims. Every shares the identical 38mm outer width and 23mm depth. However the rear rims will get wider 4mm hookless beads for additional affect power, leading to a 30mm inner width. And the entrance rims use barely thinner 3.5mm beads, yielding a barely wider 31mm inner width.
Similtaneously making the rear tremendous robust, Hunt settled on fewer spokes and the ~10% lighter carbon layup for the entrance wheel, which nonetheless provided loads of affect power.
So, what else is new?
H_Ratchet XL 40T hub
Constructing a bulletproof carbon enduro wheel meant it wanted an appropriately burly hub, too. So Hunt builds up the Confirmed Enduro wheels round a brand new HUNT H_Ratchet XL 40T hub, “delivering the best degree of sturdiness at decreased weight, that includes an outsized inboard ratchet ring designed to deal with excessive torque hundreds, 9-degree engagement for decreased pedal kickback, outsized 17mm stepped axle, and improved hub sealing
interfaces to maintain the weather out.”
40-tooth engagement isn’t extremely quick. However Hunt wished to stability fast engagement with the high-load sturdiness you get from massive enamel on confirmed ratchet ring applied sciences.
The brand new hubs spin on long-lasting Enduro ABEC5 stainless-steel cartridge bearings to maintain upkeep must a minimal. They usually handbuild the wheels with triple-butted spokes and brass nipples with washers for the last word in sturdiness.
Tech particulars
- ride-tuned UD carbon rims with H_Core inner carbon insert for elevated power & higher carbon compaction
- 10K weave Anti-Splinter carbon layer molded slightly below the outermost UD carbon layer to scale back enlargement of “micro-cracks”
- identical symmetric exterior rim form entrance & rear, however with front- & rear-specific inner width & layup…
- 38mm exterior x 23mm deep
- 31mm inner entrance rim with 3.5mm large hookless beads & locking tubeless shelf
- entrance laced 3x with 28 triple butted Pillar spokes – 2.0-1.7-2.0 (2.2 on the strengthened head) for elevated compliance
- 30mm inner rear rim with 4mm large hookless beads & locking tubeless shelf
- rear laced 3x with 32 triple butted Pillar spokes – 2.0-1.8-2.0 (2.2 on the head) for additional power & elevated affect resistance
- brass nipples with stainless nipple washers entrance & rear
- 40POE H_Ratchet XL 40T hub with fast 9° engagement
- premium Enduro ABEC5 sealed stainless bearings
- Shimano HG, MicroSpline & SRAM XD freehubs accessible
- 29″ solely entrance, 29″ or 27.5″ rear
- 12mm thru-axle Enhance spacing solely
- 1956g claimed weight for 29er wheelset, 1879g for a Mullet wheelset
- rated for mountain bikes as much as 190mm fork journey
- delivered pre-taped tubeless-ready and together with alloy Hunt tubeless valves with valve core elimination caps, plus spare spokes
- H_Care Free lifetime crash protection offered
Hunt Confirmed Carbon Enduro MTB wheels – Pricing, choices & availability
These new additional impact-resistant Hunt Confirmed Carbon Enduro H-Core mountain bike wheels can be found globally now on-line in restricted portions, with fast US, EU & UK delivery from native warehouses. The wheels promote for $1500 / 1450€ / £1200 instantly from Hunt.
“Whether or not it’s solo daybreak patrol or getting free together with your mates on the weekend, we constructed the Confirmed Carbon Enduro H_Core wheels to carry your line, earn your belief, and maintain you charging. They’re for the riders who make it some extent to make each trip sketchy; recognizing gaps the place others see corners, and taking a giant pull when others shut it down. We didn’t make these for the showroom, we made them for the sort of rides you continue to discuss weeks later. Assured. Managed. Composed. Even once you’re confronted with nothing however chaos.”
-James Stokoe, Hunt MTB Model Supervisor, USA
